How to Hang a Traditional Wreath on a Brick Wall

By Lynch Creek Farm | Published: 2026-10-26

Category: How-to Guides

Learn how to securely hang a fresh Traditional wreath on brick without damaging the masonry. Step-by-step instructions for outdoor installation.

Quick Answer

Use a brick wall wreath hanger or masonry anchors to mount your Traditional wreath securely without damaging the brick. Follow the steps below for a sturdy, weatherproof installation.

Why You Need a Brick-Specific Hanger

Brick is tough but porous, and drilling directly into it can crack the surface or weaken the mortar. A brick wall wreath hanger that fits into a mortar joint is the simplest no-drill option, while masonry anchors work well when you need extra strength for a heavy fresh wreath.

The Traditional wreath is a fresh, fragrant evergreen wreath that can be heavy, especially when wet. A secure mounting method ensures it stays in place through winter weather.

Consider the Weight and Exposure

Fresh wreaths are heavier than artificial ones, and rain or snow adds extra weight. If your brick wall is exposed to strong winds, choose a hanger rated for at least 20 pounds and check it periodically.

Also consider the wreath's location: a sheltered entryway will need less reinforcement than an open, windy wall.

Step-by-Step Brick Mounting

Choose Your Hanger: Select a brick wall wreath hanger that fits into a mortar joint, or a masonry anchor kit if you prefer a more permanent mount. Check the weight rating—your fresh Traditional wreath will be heavier than it looks. Verify the hanger's weight capacity before buying.
Position the Hanger: Hold the hanger against the brick wall at your desired height. For a mortar-joint hanger, slide it into a horizontal mortar line. If using masonry anchors, mark the drill points on the brick itself. Make sure the hanger is level and centered before proceeding.
Secure the Hanger: For mortar hangers, gently tap it into the joint with a mallet until snug. For anchors, drill pilot holes with a masonry bit, insert the anchors, and screw in the hanger. Avoid overtightening to prevent cracking. Use a masonry bit and drill at low speed to avoid damaging the brick.
Test the Strength: Before hanging your wreath, pull firmly on the hanger to ensure it's secure. If it moves, reposition or reinforce with a second hanger. A wobbly hanger will only get worse with weather and weight.
Hang the Wreath: Place the Traditional wreath on the hanger, making sure the wire or loop is fully seated. Step back and adjust the bow so it hangs straight. Check the wreath after strong winds or heavy rain to ensure it's still secure.

Product Fact

The Traditional: The Traditional is a classic Christmas wreath and our most popular, overflowing with fragrant evergreens including noble fir, cedar, and juniper. Its dense, fresh evergreen construction gives it a full look and a pleasant scent, but also means it's heavier than artificial wreaths, so a secure brick mounting is essential.
The Traditional