How to Hang an All Laced Up Wreath on Any Front Door
By Lynch Creek Farm | Published: 2026-11-01
Category: How-to Guides
A practical, damage-free method for hanging the All Laced Up wreath on wood, glass, or metal doors, with the right hanger, height, and light placement for a polished front door display.
Quick answer
Hang the All Laced Up wreath from an over-the-door hook at eye level, add a felt or foam pad behind the hook to protect the finish, and use the wreath's built-in hanger option rather than taping or nailing into the door.
Why the hanger option matters more than the hook
The All Laced Up wreath is assembled on a fresh noble fir and cedar base with frosted pinecones, faux red berries, and two ice skate ornaments, so the weight is not evenly distributed. A hanger option chosen at checkout gives you a fixed attachment point that keeps the wreath from sliding or twisting when the door opens and closes.
If you skip the hanger and rely on the base alone, the wreath can sag toward the heavier skate side. That is a display problem, not a damage problem, but it changes how the wreath reads from the street.
Door material changes the hardware, not the method
Wood doors tolerate over-the-door hooks well, but glass and metal doors need a hook with a padded back or a suction-style hanger rated for the wreath's weight. Never drill into a glass or metal door for a seasonal wreath; the repair cost outweighs any stability gain.
On a wood door with a tight frame, measure the gap at the top before buying a hook. A hook that is too thick will keep the door from closing flush, and a hook that is too thin will wobble.
When lights change the hanging plan
If you add the lights option, route the cord along the door frame rather than across the wreath face, and secure it with clear clips. A cord that crosses the skates or berries distracts from the woodland look and can pull the wreath off-center.
Battery packs belong on the hinge side of the door, hidden behind the wreath's upper edge, so the cord has the shortest run and the least slack.
Steps to hang the All Laced Up wreath
- Choose the hanger for your door material: Use an over-the-door hook with a padded back for wood, glass, or metal doors. For glass and metal, confirm the hook is rated for the wreath's weight and has a non-marring pad. Common mistake: buying a plain metal hook that scratches the door finish or slips on glass. Test the hook's grip with the door open and closed before adding the wreath.
- Set the height at eye level: Measure from the top of the door down to roughly eye level, then mark that spot lightly with painter's tape. Hang the hook so the wreath's center sits on the mark. Common mistake: hanging too high, which makes the wreath look small and hides the skates from the street. Have someone stand at the curb to confirm the height before you commit.
- Attach the wreath using the hanger option: Clip or loop the wreath's hanger option onto the hook, then adjust the wreath so the two ice skates sit level with each other. Common mistake: hanging from the base instead of the hanger, which lets the wreath sag toward the heavier side. Gently rotate the wreath on the hook to find the balance point before stepping back.
- Route light cords along the frame: If you added lights, run the cord down the hinge side of the door and secure it with clear clips every few inches. Place the battery pack behind the upper edge of the wreath. Common mistake: letting the cord cross the wreath face or dangle loose where the door can pinch it. Open and close the door fully once to check that the cord clears the frame.
- Check stability and door clearance: Close the door and look for gaps at the top, then open it and confirm the wreath does not swing into the frame. Common mistake: ignoring a door that no longer latches because the hook is too thick. If the door does not close flush, switch to a thinner hook rather than forcing the latch.
Product facts
- All Laced Up: The wreath is built on a fresh noble fir and cedar base with frosted pinecones, faux red berries, faux frosted branches, and two red-and-white ice skate ornaments. The mixed base and ornaments create uneven weight, so a fixed hanger point keeps the wreath hanging straight instead of tilting toward the skates.
All Laced Up
